S Beam Load cells
- New for 2006 a range of stainless steel S beam load cells from 100kg to 5 tonnes.
- Each loadcell is supplied with a set of rod end bearings and end caps to enable use in tension and compression.
- Requires connection to our range of loadcell instrumentation.
Load cell specification
| Part Number | SB500K | SB1T | SB2T | SB5T |
| Capacity | 500kg | 1t | 2t | 5t |
| Resolution | 0.2kg | 0.0005t | 0.001t | 0.001t |
| Weight | 0.9kg | 0.9kg | 0.9kg | 1.9kg |
| Protection |
IP68 | |||
| Safety Factor |
5:1 | |||
| Operating Temp |
-30 - +80c | |||
| Accuracy |
+/- 0.3% of applied load | |||
| Dimension A | 70mm | 70mm | 70mm | 90mm |
| Dimension B | 90mm | 90mm | 90mm | 120mm |
| Dimension C | 19mm | 19mm | 19mm | 26mm |
| Dimension D | 19mm | 19mm | 19mm | 26mm |
| Dimension E | M12x1.75 | M16x2 | M16x2 | M24x2 |
Contact Form
S Beam Loadcell
Copyright © 2008 Straightpoint (UK) Limited Clovelly Road, Southbourne, Hampshire United Kingdom
Tel: +44 (0)1243 378921 Fax: +44 (0) 1243 377745
Terms & Conditions
