S Beam - Loadcell

Description

A range of stainless steel S beam load cells from 100kg to 5 tonnes.
Each loadcell is supplied with a set of rod end bearings and end caps to enable use in tension and compression.

Requires connection to our range of loadcell instrumentation.

Applications

• Force Measurement in tension & compression
• Engine dynomometers

Metric Specifications

Part Number	SB500K	SB1T	SB2T	SB5T
Capacity	500kg	1t	2t	5t
Resolution	0.2kg	0.0005t	0.001t	0.001t
Weight	0.9kg	0.9kg	0.9kg	1.9kg
Protection	IP68
Safety Factor	5:1
Op Temp	-30 - +80c
Accuracy	+/- 0.3% of applied load
Dimension A	70	70	70	90
Dimension B	90	90	90	120
Dimension C	19	19	19	26
Dimension D	19	19	19	26
Dimension E	M12x1.75	M16x2	M16x2	M24x2

US Specifications

Part Number	SB500K	SB1T	SB2T	SB5T
Capacity	1100lb	2200lb	4400lb	11000lb
Resolution	0.5lb	1lb	2lb	2lb
Weight	2lb	2lb	2lb	4.2lb
Protection	IP68
Safety Factor	5:1
Operating Temp	-22˚F to 176˚F
Accuracy	+/- 0.3% of applied load
Dimension A	2.76	2.76	2.76	3.94
Dimension B	3.54	3.54	3.54	4.72
Dimension C	0.75	0.75	0.75	1.02
Dimension D	0.75	0.75	0.75	1.02
Dimension E	M12x1.75	M16x2	M16x2	M24x2
Dimension F	1.26	1.26	1.26	1.77

Downloads

Datasheet

Options

Handheld plus - This display will connect to the Loadlink plus, Miniweigher plus, Loadblock plus as a secondary display and controller. It will also connect to our range of non-indicating loadcells and loadshackles. As an option we can fit an RS485 output to enable connection to our Desktop Controller software package. Powered by a single PP3 battery, the Handheld plus features tare, peak hold and four units of measure (kg, t, kN & lbs)