Non indicating Compression Loadcell
NON INDICATING COMPRESSION LOADCELL
Description
Non-indicating version of the Loadblock plus.Manufactured in ranges from 1 tonne to 1000 tonnes.
Supplied with ten metres of cable as standard, other lengths are available on request.
Manufactured from stainless steel and supplied with loadcap to protect object being tested.
Requires connection to our handheld display or our Desktop controller software package.
..........................
Metric Specifications
| Part Number | NI5TC | NI10TC | NI25TC | NI50TC | NI100TC | NI150TC | ||
| Capacity | 5t | 10t | 25t | 50t | 100t | 150t | ||
| Resolution | 0.001t | 0.005t | 0.01t | 0.02t | 0.1t | 0.1t | ||
| Weight | 3.2kg | 3.2kg | 3.2kg | 6.2kg | 15.5kg | 15.5kg | ||
| Safety Factor | 3:1 | |||||||
| Protection | IP68 | |||||||
| Op Temp | -40c to +65c | |||||||
| Accuracy | +/- 0.3% of applied load | |||||||
| Dims A(mm) | 76 | 76 | 76 | 10 | 152 | 152 | ||
| Dims B (mm) | 83 | 83 | 83 | 127 | 184 | 184 | ||
| Dims D (mm) | 32 | 32 | 32 | 59 | 80 | 80 | ||
| Dims E (mm) | 10 | 10 | 10 | 13 | 26 | 26 | ||
| Dims F | M12 x 1.75 | M12 x 1.75 | M12 x 1.75 | M20 x 2.5 | M20 x 2.5 | M20 x 2.5 | ||
| Dims R (mm) | 152 | 152 | 152 | 152 | 432 | 432 | ||
US Specifications
| Part Number | NI5TC | NI10TC | NI25TC | NI50TC | NI100TC | NI150TC |
| Capacity | 11000lb | 22000lb | 55000lb | 55ton | 110ton | 165ton |
| Resolution | 2lb | 10lb | 20lb | 0.02t | 0.1t | 0.1t |
| Weight | 7lb | 7lb | 7lb | 13.64lb | 34lb | 34lb |
| Safety Factor | 3:1 | |||||
| Protection | IP68 | |||||
| Operating Temp | -40˚F to 149˚F | |||||
| Accuracy | +/- 0.3% | |||||
| Dimension A | 2.99 | 2.99 | 2.99 | 4.02 | 5.98 | 5.98 |
| Dimension B | 3.27 | 3.27 | 3.27 | 5.00 | 7.24 | 7.24 |
| Dimension D | 1.26 | 1.26 | 1.26 | 2.32 | 3.15 | 3.15 |
| Dimension E | 0.39 | 0.39 | 0.39 | 0.51 | 1.02 | 1.02 |
| Dimension F | M12 x 1.75 | M12 x 1.75 | M12 x 1.75 | M20 x 2.5 | M20 x 2.5 | M20 x 2.5 |
| Dimension R | 5.98 | 5.98 | 5.98 | 5.98 | 17.01 | 17.01 |
Options
Desktop Controller Software
Handheld plus - This display will connect to the Loadlink plus, Miniweigher plus, Loadblock plus as a secondary display and controller. It will also connect to our range of non-indicating loadcells and loadshackles. As an option we can fit an RS485 output to enable connection to our Desktop Controller software package. Powered by a single PP3 battery, the Handheld plus features tare, peak hold and four units of measure (kg, t, kN & lbs)
