Media Articles

Crosby Straightpoint

  This email address is being protected from spambots. You need JavaScript enabled to view it.

 UK: +44(0)2392 484491    USA: +1 918 834 4611

arborist with straightpoint impact block

Tree surgeons and other professionals from the arboriculture industry have embraced a new technology that measures the shock load and weight of branches as they are cut during felling or maintenance.


The Impact Block load cell is manufactured in partnership with tree safety equipment pioneer DMM and contains electronics and software from force measurement, load monitoring and suspended weighing load cell equipment specialist Straightpoint. The product was commissioned by a tree maintenance company in the sector.

The industry has acknowledged that the Impact Block can fill gaps in knowledge about the forces put through rigging equipment and the weight of loads as they are cut away from trees. It can become as important as a training device as it is a practical onsite tool for the sector.

Unlike crane-related or other typical rigging scenarios, in tree applications professionals do not always have an anchor point above the lifting point. If only the stem and canopy of a spruce tree remains, for example, a rope break may have to be attached to the bottom of the tree from where a rope and pulley will connect to the piece being cut.

As cuts are made, wood is essentially thrown into the rigging from above. This is in stark contrast to crane lifts, where the hook is typically positioned directly above the mass of the load being rigged and lifted. In the lifting and material handling business, testing is also commonplace but this is frequently impossible in the tree sector because of logistics and the damage such tests could cause to soil and surrounding areas, which in themselves are of critical importance to the health of the tree and subsequent maintenance operations.

The aesthetic curves of the Impact Block combine with strength and durability to ensure a rope-friendly surface. Utilising wireless dynamic load monitoring electronics and strain gauge technology, real time data can be displayed on a handheld controller, tablet or laptop at speeds up to 200Hz. Importantly, this eliminates the estimation work that often goes into arborist applications.

The UK’s Heath and Safety Executive (HSE) was involved in a research programme in 2008, which opened many people’s eyes to the extent of the forces generated and the requirement to more scientifically and accurately research such activity. The launch of the Impact Block places a yardstick in the progress of the sector’s technological advancement and many are campaigning for its widespread use.

One arborist said: “To be able to demonstrate real time shock load data to a group of students is incredibly powerful. Furthermore, we can use the technology to delve deeper into dynamic load situations by researching where forces on the anchor point are at their greatest, while investigating what is happening to the rigging before and after that moment.”

He added: “We need to demonstrate these numbers to existing arborist professionals and those new to our industry. Unless we understand the forces, we can’t understand the safety factors. We frequently work in close proximity to other trees, buildings and infrastructure. The consequences of a lack of understanding about the loads and the forces they place on rigging equipment can be catastrophic if not researched extensively.”

It is anticipated that the Impact Block will be of particular interest to tree professionals in North America, where utilities equipment and power lines are more commonly above ground. Uptake is also expected from large contractors and those engaged in arborist-related training.

Straightpoint director David Ayling said: “The technology built into the impact block is based on technology that has proven its accuracy and durability in a myriad of demanding applications in the lifting and other industries, largely based on the blueprint of our most popular product, the Radiolink plus load cell. The conception of the Impact Block again demonstrates our ability to apply our force measurement expertise to industries looking to use their own state-of-the-art hardware and equipment to raise safety levels and improve best practice. We look forward to a long and fruitful partnership with the tree maintenance sector.”
Please let us know your name.

Invalid Input

Invalid Input

Invalid Input

Please let us know your email address.

Your email does no match please enter again

Invalid Input

Invalid Input

Once you have sent this form it will instantly reach a Crosby SP representative, directly, who will respond to your enquiry by email asap. Or if you would prefer a call back please let us know in the message.